Relvora Prep

GRE Numeric Entry and Select-All Questions: The Rules That Cost Points

How GRE Numeric Entry and select-one-or-more questions are credited: exact answers, equivalent forms, rounding, units beside the box, fraction boxes, and testing every choice.

By the Relvora team · Updated · 6 min read

Two GRE Quant formats take away the safety net of five choices with one right answer. Numeric Entry has no choices at all, so the form of what you type matters. Select-one-or-more questions give credit only for exactly the right set. The math is usually no harder, but both have rules that are easy to break when you rush.

In short: In Numeric Entry, type the exact value unless the question asks you to round, and round only at the end. Read the label beside the box, because a % or "million" changes what you type. Fractions go in two boxes, as integers, and don't need reducing. In select-all, test every choice, because the right set can be one choice or all of them. For a range question, find the allowed interval first, then test each choice. If the question says "indicate two", select exactly two.

What are ETS's Numeric Entry rules?

From ETS's directions for the format:

  • One box: an integer or a decimal. Type a hyphen for a negative sign and a period for a decimal point.
  • Two boxes: a fraction, numerator on top and denominator below. Each box takes an integer. You can't use a decimal point in either box.
  • Equivalent forms all count. 2.5 and 2.50 earn the same credit.
  • Exact unless told otherwise. Enter the exact answer unless the question asks you to round.
  • Fractions don't need reducing, though you may need to reduce one to fit it in the boxes.
  • Transfer Display copies the calculator result into a one-box answer. It can't fill fraction boxes, and it copies the number as shown. If the question wants it rounded or as a percent, you adjust it yourself.

The next four sections cover where these rules cost people points.

Fraction boxes: any equivalent fraction works

What fraction of the integers from 1 to 60, inclusive, are multiples of 4 or of 6?

Multiples of 4: 60 ÷ 4 = 15. Multiples of 6: 60 ÷ 6 = 10. Numbers counted twice are the multiples of 12: 60 ÷ 12 = 5. So 15 + 10 − 5 = 20 of the 60 integers qualify.

Answer: 20/60. You can type 20 over 60, 1 over 3, or 2 over 6. All are correct.

Don't spend time reducing, and don't convert to a decimal. 1/3 is 0.333…, which you can't type exactly, and fraction boxes don't accept a decimal point anyway. ETS's calculator guidelines say the same: avoid the calculator when it would turn a fraction answer into a decimal.

Rounding: once, at the end

A recipe uses 2/3 cup of sugar per batch. How many cups of sugar are needed for 7 batches? Give your answer to the nearest tenth.

Exactly: 7 × 2/3 = 14/3 = 4.666… cups. The hundredths digit is 6, so round up: 4.7.

The trap is rounding early. Round 2/3 to 0.7 first, and you get 7 × 0.7 = 4.9, which is wrong. Rounding to 0.67 gives 4.69, which happens to round to 4.7, but you can't count on that. ETS's advice is to carry out every intermediate step exactly and round only the final answer.

Also note the reverse rule. If a question gives no rounding instruction, the answer is exact. An exact answer of 4.666… can't be typed in a single box, so without a rounding instruction you'd expect fraction boxes.

Labels beside the box

ETS points out that labels before or after the box tell you what kind of answer to give. Watch for units, for orders of magnitude such as millions, and for percents versus decimals.

A jacket's price drops from $80 to $68. By what percent did the price decrease? [ box ] %

The drop is $12, and 12/80 = 0.15. The box already has a % sign after it, so type 15. Typing 0.15 would mean 0.15%, which is wrong.

The same applies to a "$" before the box (type 39.50, not "$39.50") and to a label like "million" after it. If a city's budget is $4,200,000 and the box says million, type 4.2.

Select-all: test every choice

ETS's directions for select-one-or-more questions:

  • If the question doesn't say how many to select, select all that apply.
  • The right set may be just one choice or every choice.
  • No credit is given unless you select all of the correct choices and no others.
  • If the question says how many to select, select exactly that number.

So you can't stop at the first right choice, and you can't add one that "nearly" works. Every choice is its own true-or-false check.

Integer ranges: watch the ends

x is an integer and |2x − 5| < 7. Which of the following could be the value of x? Indicate all such values. (A) −1 (B) 0 (C) 3 (D) 5 (E) 6

Rewrite without the absolute value: −7 < 2x − 5 < 7. Add 5: −2 < 2x < 12. Divide by 2: −1 < x < 6. The integers allowed are 0 through 5.

Answer: (B), (C) and (D). The traps are (A) and (E): −1 and 6 are the ends of the interval, and the strict "<" leaves them out. Check one: x = 6 gives |12 − 5| = 7, which isn't less than 7.

Ranges of an expression: find the extremes first

ETS suggests finding the least and greatest possible value when conditions limit the answers. That's the fastest route when the question asks about an expression of two variables.

−2 ≤ a ≤ 3 and 1 ≤ b ≤ 4. Which of the following could be the value of ab? Indicate all such values. (A) −10 (B) −8 (C) −1 (D) 0 (E) 7 (F) 12 (G) 13

The extremes of a product come from the ends of each range, so check all four end pairs:

a b ab
−2 1 −2
−2 4 −8
3 1 3
3 4 12

The least is −8 and the greatest is 12. Every value between them is reachable as a and b move through their ranges. For example, ab = 0 when a = 0, and ab = 7 when a = 7/4 and b = 4.

Answer: (B), (C), (D), (E) and (F). A common error is to multiply the two lower ends, −2 × 1 = −2, and call that the minimum. With a negative in play, the minimum comes from the negative end times the largest b.

"Indicate two": exactly that many

A right triangle has a hypotenuse of length 13. Which two of the following could be the lengths of its other two sides? Indicate both of the lengths. (A) 3 (B) 5 (C) 9 (D) 10 (E) 12

The legs need a² + b² = 13² = 169. Test each choice by what it would need: 3 needs b² = 160, 5 needs 144 = 12², 9 needs 88, and 10 needs 69. Only 5 and 12 pair up.

Answer: (B) and (E). When the question names a count, exactly that many choices are right. Select two, and if you find a third that seems to work, recheck your arithmetic.

A checklist before you submit

Numeric Entry

  • Did I answer the quantity the question asks for, not an intermediate one?
  • Is there a rounding instruction? If not, is my answer exact?
  • What does the label beside the box say: %, $, million, a unit?
  • Fraction boxes: integers only, reducing optional.

Select-all

  • Did I test every choice, including the last one?
  • Are the ends of the range included (≤) or excluded (<)?
  • If the question names a count, did I select exactly that many?

For more practice with these rules, read the Numeric Entry and select-all lesson. The math behind the examples is covered in absolute value, inequalities, percents and triangles. To drill the format in timed sets, use the format practice page. For the full picture of how GRE Quant is built and scored, see GRE Quant: what's tested and how it's scored.

GRE® is a registered trademark of ETS. Relvora is not affiliated with or endorsed by ETS.

Sources

Frequently asked questions

Is 2.50 accepted for 2.5 on GRE Numeric Entry?

Yes. ETS says equivalent forms of the correct answer, such as 2.5 and 2.50, are all correct. Fractions also don't need to be reduced, though you may need to reduce one to fit it in the boxes.

Should you round GRE Numeric Entry answers?

Only when the question tells you to. Otherwise enter the exact answer. When you do round, ETS advises doing every intermediate step exactly and rounding only the final answer.

Is there partial credit on GRE select-all questions?

No. ETS gives no credit unless you select all of the correct choices and no others. The correct set can be a single choice or every choice.

Keep reading