GMAT Data Insights lesson · Read Values
GMAT Data Insights: reading values and scales on charts and tables
How to read bar charts, line charts and tables exactly on GMAT Data Insights: find the right mark, read the gridlines, avoid truncated-axis traps.
The core idea
Every chart question starts with a reading. Fix the category on the horizontal axis, the series in the legend, and read the mark against the gridlines; in a table, fix the row by its name and the column by its header. Compare values, never bar lengths.
Core ideas
Words used here
- Category: what's along the horizontal axis (years, quarters, regions).
- Series: one set of bars or one line, named in the legend.
- Gridline: the faint horizontal lines; their values are on the vertical axis.
Every Graphics Interpretation question starts with a reading. If the reading is wrong, every step after it is wrong too, so the reading deserves the most care.
Read in three moves: category, series, value. Say the value out loud with its unit ("120 thousand trips") before doing anything with it. In a table, the row is fixed by the name in the first column and the column by its header.
Here is a small chart to practice on. A city bike scheme logged its trips (in thousands) each quarter.
| Question | Reading | Answer |
|---|---|---|
| Trips in Q3 | Q3 bar, halfway between 80 and 90 | 85 thousand |
| Busiest quarter | tallest bar | Q3 |
| Q3 minus Q4 | 85 − 60 | 25 thousand |
The method, every time:
- Name the category (Q3) and find it on the horizontal axis.
- Name the series in the legend and take that bar or line only.
- Count gridlines up from a labelled one. Values sit on a gridline or exactly halfway between two.
- Write the value with its unit, then compute. If "Show as table" is available, use it to confirm.
Reading a bar chart
Why it works. In a grouped bar chart, two labels fix each bar: the category under it and the series colour in the legend. Gridlines are evenly spaced, so counting half-steps up from a labelled gridline gives the bar's exact value. Get both labels right and the reading can't land on a neighbour.
How to spot it: "In 2022, the revenue for Mall kiosk was ___", "was greatest in ___".
Example. A coffee chain sells through two channels. The chart shows revenue in thousands of dollars. What was the Mall kiosk revenue in 2023, and in which year was Mall kiosk revenue greatest?
- Find 2023 on the horizontal axis.
- Find Mall kiosk's colour in the legend and take that bar, not its neighbour.
- The bar ends halfway between the 120 and 140 gridlines: 130, so $130 thousand.
- For "greatest", compare only the Mall kiosk bars: 100, 120, 130, 110. The greatest is 2023.
Trap: the Drive-through bar right next to it ends at 140. Reading it gives $140 thousand, and it's always among the options. For "greatest", the tallest bar on the whole chart is Drive-through in 2024 (150). That's the wrong series, so 2024 is the trap answer.
If two bars look close, check the runner-up against the gridlines too: 130 vs 120 is one half-step apart.
Try it. On the same chart, in which year did Drive-through revenue first exceed Mall kiosk revenue, and by how much?
Show the answer
- Read both bars in each year, starting from 2021.
- 2021: Drive-through 90, Mall kiosk 100. Not ahead.
- 2022: Drive-through 110, Mall kiosk 120. Still not ahead.
- 2023: Drive-through 140, Mall kiosk 130. Ahead for the first time: 2023, by $10 thousand.
Edge cases.
- Read the axis step first. With gridlines every 20, halfway is 10 more. With gridlines every 25, halfway is 12.5 more.
- "Greatest" within one series compares only that series' bars. "Greatest on the chart" compares every bar.
- Units live in the axis label. "Revenue ($ thousand)" makes a reading of 130 equal to $130,000, and the answer choices may be written either way.
GMAT-level example. A bakery has three branches. The chart shows loaves sold each month, in hundreds. In the month when Riverside sold the most loaves, how many more loaves did Hilltop sell than Old Town?
- First find the month. Compare only the Riverside bars: 24, 30, 36, 28. The peak is May (36).
- In May, read the Hilltop bar: halfway between 28 and 32, so 30.
- In May, read the Old Town bar: halfway between 20 and 24, so 22.
- Subtract: 30 − 22 = 8 hundred, so 800 loaves.
- Check the units: the axis is in hundreds, so 8 means 800 ✓.
The tallest bar on the whole chart is Hilltop in June (38). Using June gives 38 − 34 = 4, or 400 loaves, the trap answer.
Check yourself. On the coffee chain chart, what was the combined revenue of both channels in 2024?
Check your answer
150 + 110 = $260 thousand.
Differences on a line chart
Why it works. Each line is one series, and each point on it is that series at one time. A change over time moves along one line, so it subtracts two points of the same series. A gap is the vertical distance between two lines at one time, so it subtracts two series at the same point.
How to spot it: "From March to May, X fell by ___", "the gap between A and B was widest in ___".
Example. Two wind farms, monthly output in GWh. From March to May, by how much did Saltmarsh's output fall? In which month was the gap between the farms widest?
A change over time follows one line across two months:
- Saltmarsh in March: 65 GWh. Saltmarsh in May: 60 GWh.
- 65 − 60 = 5 GWh.
A gap compares two lines at the same month. Read both values at each month and subtract:
| Month | Jan | Feb | Mar | Apr | May | Jun |
|---|---|---|---|---|---|---|
| Saltmarsh | 45 | 55 | 65 | 70 | 60 | 50 |
| Dunehill | 30 | 40 | 50 | 55 | 65 | 75 |
| Gap | 15 | 15 | 15 | 15 | 5 | 25 |
The widest gap is in June (75 − 50 = 25).
Trap: answering 60 (the May value, not the change), or 15 (Dunehill's rise over the same months). For the gap, April looks tempting because Saltmarsh peaks there, but the gap in April is only 15. Lines that are high are not the same as lines that are far apart.
Try it. On the wind farm chart, by how much did Dunehill's output rise from February to June? In which month did Dunehill first produce more than Saltmarsh?
Show the answer
- Follow the Dunehill line: 40 GWh in February, 75 GWh in June.
- 75 − 40 = 35 GWh.
- Compare the two lines month by month: Dunehill is below until April (55 vs 70).
- In May, Dunehill (65) is above Saltmarsh (60). The first month is May.
Edge cases.
- The gap can change sign. From January to April, Saltmarsh leads. In May and June, Dunehill leads. "By how much did Saltmarsh exceed Dunehill" is negative in those months.
- "Fell by" and "fell to" ask different things. Fell by 5 is the change; fell to 60 is the new value.
- The largest one-month change compares every pair of neighbouring months, not just the first and last.
GMAT-level example. A ferry company runs two routes. The chart shows monthly passengers, in thousands. Find the month when the gap between the routes was smallest. By how much had South's passengers changed from January to that month?
| Month | Jan | Feb | Mar | Apr | May | Jun |
|---|---|---|---|---|---|---|
| North | 40 | 50 | 45 | 55 | 60 | 50 |
| South | 20 | 30 | 35 | 50 | 40 | 25 |
| Gap | 20 | 20 | 10 | 5 | 20 | 25 |
- Read both lines at every month and subtract, as in the table above.
- The smallest gap is in April (55 − 50 = 5).
- Now follow the South line only: 20 in January, 50 in April.
- Change: 50 − 20 = +30 thousand passengers.
- Check: 20 + 30 = 50, South's April value ✓.
The trap answers are 50 (South's April level, not the change), 5 (the gap itself) and 15 (North's change, the wrong line).
Check yourself. On the wind farm chart, how did Saltmarsh's output change from April to June, and what was the gap between the farms in June?
Check your answer
50 − 70 = −20 GWh (a fall of 20). The June gap is 75 − 50 = 25 GWh.
Reading a table
Why it works. Every cell sits where one row meets one column, so two labels fix it: the row name and the column header. Sorting moves whole rows, so each value stays attached to its name. Read across the one row you named, and the cell can't come from anywhere else.
How to spot it: "In the 'Workers' column, the entry for Edgehill is ___", "the warehouse with the most orders has ___ workers".
Example. Five warehouses. What is Edgehill's entry in the Workers column?
| Warehouse | Workers | Floor area (thousand m²) | Orders (thousand) |
|---|---|---|---|
| Ashby | 26 | 12 | 140 |
| Carlow | 17 | 9 | 96 |
| Edgehill | 19 | 14 | 118 |
| Fenwick | 21 | 11 | 130 |
| Marsh | 23 | 16 | 152 |
- Fix the row by its name: Edgehill.
- Fix the column by its header: Workers.
- Read across the Edgehill row only: 19.
Trap: 21 is the entry in the next row (Fenwick), and 14 is Edgehill's floor area, one column over. Both are classic wrong options.
Sorting by a column (click its header) moves whole rows, so it never changes a row's values. Sorted by Orders, the order is Marsh, Ashby, Fenwick, Edgehill, Carlow, and Edgehill still has 19 workers.
Try it. In the same table, how many orders did the warehouse with the most workers handle?
Show the answer
- Find the row first: scan the Workers column for the largest value. Ashby has 26.
- Read across the Ashby row to the Orders column: 140.
- The answer is 140 thousand orders. (Marsh's 152 is the most orders, but Marsh has only 23 workers.)
Edge cases.
- Two-step lookups: "the warehouse with the most orders has ___ workers" finds the row in one column, then reads another column.
- Units sit in the header. Edgehill's floor area of 14 means 14,000 m², because the column is in thousand m².
- Ties in the search column: if two rows share the largest value, the question must say which one. Check for a tie before you read across.
GMAT-level example. Five regional airports, one day's figures.
| Airport | Runways | Flights per day | Passengers (thousand) | On-time rate |
|---|---|---|---|---|
| Avon | 2 | 310 | 41 | 86% |
| Bryce | 3 | 420 | 45 | 79% |
| Corby | 2 | 280 | 47 | 91% |
| Dalton | 4 | 515 | 66 | 74% |
| Elmore | 2 | 345 | 39 | 83% |
The airport with the second-most passengers has how many fewer flights per day than the airport with the most runways?
- Sort by Passengers, most first: Dalton (66), Corby (47), Bryce (45), Avon (41), Elmore (39). Second is Corby.
- Read across the Corby row to Flights per day: 280.
- The most runways: Dalton, with 4. Read across to Flights per day: 515.
- Subtract: 515 − 280 = 235 fewer flights.
- Check: 280 + 235 = 515 ✓.
Bryce is the trap. It's the second row of the table and second by flights (420), and it gives 515 − 420 = 95.
Check yourself. In the warehouse table, what is the floor area of the warehouse with the fewest workers?
Check your answer
Carlow has the fewest workers (17). Its floor area is 9 thousand m², or 9,000 m².
Truncated axes
Why it works. A bar's length shows its value minus the value where the axis starts, not the value itself. Lengths are in the same ratio as values only when the axis starts at 0. On a truncated axis, read each value from the gridlines and divide those.
How to spot it: the vertical axis starts above 0, and the question asks "how many times" or "what percent more".
Example. Water output from four sources, in thousand litres. The axis starts at 120. Wells' output is how many times Springs' output?
- Read the values, not the bar lengths: Wells = 240, Springs = 180.
- Divide: 240 ÷ 180 = 4/3 ≈ 1.33. Wells is a third more than Springs.
Drawn from 0, the same two values look like this:
Trap: on the truncated chart the Wells bar is 240 − 120 = 120 units long and the Springs bar is 180 − 120 = 60 units long, so it looks twice as big. "Twice as much" is the trap. The same happens with Brook and Lake: their bars are 90 and 30 units long (3 times), but 210 ÷ 150 = 1.4.
Try it. On the same chart, Wells' output is what percent more than Lake's?
Show the answer
- Read the values: Wells = 240, Lake = 150.
- Difference: 240 − 150 = 90.
- Divide by Lake's value: 90 ÷ 150 = 0.6, so 60% more.
- The bars are 120 and 30 units long, 4 times, which looks like 300% more. That's the trap.
Edge cases.
- Differences are safe. The gap 240 − 180 = 60 is the same whatever the axis starts at. Only "how many times" and "what percent more" are distorted.
- Line charts too. A truncated axis makes a line look steeper, so a small percent change can look dramatic.
- Find the start. Read the lowest gridline label every time. A zigzag at the bottom of the axis is another sign that it doesn't start at 0.
GMAT-level example. Average house prices in four towns, in thousands of dollars. The axis starts at 200. Ash's bar looks 3 times as long as Bay's. Ash's price is what percent above Bay's, and which town's price is exactly 1.25 times Bay's?
- Read the values, not the lengths: Ash = 320, Bay = 240.
- Ash above Bay: 320 − 240 = 80, and 80 ÷ 240 = 1/3 ≈ 33.3%.
- For 1.25 times Bay: 240 × 1.25 = 300. That's Cole.
- Check: 300 ÷ 240 = 1.25 ✓.
By bar length, Cole's bar (100) is 2.5 times Bay's (40), and Dent's bar (60) is 1.5 times. Dent's price is only 260 ÷ 240 ≈ 1.08 times Bay's. Lengths on this chart mislead on every pair.
Check yourself. A bar chart's axis starts at 50. Bar A ends at 90 and bar B at 70. How many times as long is A's bar, and how many times as large is A's value?
Check your answer
Lengths: 40 and 20, so 2 times as long. Values: 90 ÷ 70 ≈ 1.29 times as large.
How hard questions disguise it
For harder questions (L4–L5)
At L4 and L5, a reading is never the whole question; it's the first step of something else. You read two bars and then take a percent change or a ratio, read a whole line to describe a trend, or find a row by sorting a table and then read a different column. Hard charts add a third series, a legend in a different order from the bars, an axis in thousands, or an axis that starts above 0 under a "how many times" question. Slow down on the reading, say each value with its unit, and the rest of the question is usually short.
Practice
Practice reading values from charts and tables in timed sets on the reading values practice page.
Common traps
Reading the wrong bar, line or row
The most common miss is a neighbour: the next category, the other series, the row above. Put a finger (or the cursor) on the category, then on the legend colour, then read.
A gridline off
Count gridlines up from a labelled one. Values on these charts sit on a gridline or exactly halfway between two, and 'Show as table' gives every value exactly.
Answering a value when a change or gap was asked
A change over time subtracts two points on the same line; a gap subtracts two lines at the same point. Read both values, then subtract.
Bars on an axis that doesn't start at 0
When the axis starts above 0, bar lengths exaggerate differences. Compare the values from the axis: 240 vs 180 is 1.33 times, whatever the bars look like.
Judging the widest gap by eye
The widest gap is where the two lines are furthest apart, not where either line is highest. Read both values at each candidate point and subtract; lines that look far apart at the top of a chart often aren't.