10 Common GMAT Quant Traps (With Worked Examples)
Ten GMAT Quant traps, from reverse percents to averaging speeds, each with an original example, the tempting wrong answer, why it tempts you, and the fix.
By the Relvora team · Updated · 6 min read
Most GMAT Quant mistakes aren't random. They're the same handful of wrong moves, and test writers build answer choices around them. If you can spot the trap, you can usually spot the fix.
In short: The most common GMAT Quant traps come from methods that feel right but use the wrong base, the wrong kind of average, or the wrong operation. Examples include adding percent changes, averaging speeds, adding times instead of rates, and adding counts that should be multiplied. Each trap below has an original example, the tempting wrong answer, why it tempts you, and a quick check that catches it.
1. How do reverse percent problems trick you?
After a 25% increase, a price is $150. What was the original price?
- Tempting answer: $112.50, from 150 × 0.75.
- Why it's tempting: "Undo a 25% increase" sounds like "take 25% off."
- Correct: original × 1.25 = 150, so original = 150 ÷ 1.25 = $120.
- Check: 120 × 1.25 = 150. ✓
The 25% was a percent of the original, not of $150. There's a full walkthrough in reverse percent problems.
2. Why don't +20% and −20% cancel out?
A stock rises 20% and then falls 20%. What is the net change?
- Tempting answer: 0%.
- Why it's tempting: +20 and −20 add to zero.
- Correct: 1.20 × 0.80 = 0.96, a 4% decrease. With numbers: $50 → $60 → $48.
- Check: the decrease is 20% of $60, which is more than the $10 gained.
Successive percent changes multiply. They never simply add.
3. Why can't you average two speeds?
You drive 60 miles at 30 mph and return the same 60 miles at 60 mph. What is your average speed for the whole trip?
- Tempting answer: 45 mph.
- Why it's tempting: it's the average of the two speeds.
- Correct: total distance ÷ total time. The trip out takes 2 hours and the trip back takes 1 hour, so 120 miles ÷ 3 hours = 40 mph.
- Check: you spent twice as long at 30 mph, so the average must sit closer to 30 than to 60.
4. Why can't you add times in work problems?
Pipe A fills a tank in 3 hours and pipe B fills it in 6 hours. How long do they take together?
- Tempting answers: 9 hours (adding times) or 4.5 hours (averaging them).
- Why they're tempting: they use both numbers in a simple way.
- Correct: add rates. 1/3 + 1/6 = 1/2 tank per hour, so together they take 2 hours.
- Check: working together must be faster than the faster pipe alone, so the answer has to be under 3 hours.
5. When do you add and when do you multiply in counting?
A committee needs 2 managers chosen from 5 and 1 engineer chosen from 4. How many different committees are possible?
- Tempting answer: 14, from C(5,2) + C(4,1) = 10 + 4.
- Why it's tempting: you calculated both pieces correctly, then combined them the wrong way.
- Correct: every pair of managers can go with every engineer, so multiply: 10 × 4 = 40.
- Rule: "this and that" multiplies. Add only when the cases are separate options ("this or that").
6. How do "at least one" probability questions trick you?
A machine has a 10% chance of jamming on any given day, independent of other days. What is the probability it jams at least once in 2 days?
- Tempting answer: 0.20, from 0.10 + 0.10.
- Why it's tempting: the answer is close, and adding feels natural.
- Correct: 1 − P(no jams) = 1 − 0.9 × 0.9 = 1 − 0.81 = 0.19.
- Check: adding double-counts the case where it jams on both days (0.1 × 0.1 = 0.01). Over 11 days, adding would give more than 100%, which is impossible.
7. Why can't you average two averages?
Class A has 10 students with an average score of 80. Class B has 30 students with an average of 60. What is the average for all 40 students?
- Tempting answer: 70.
- Why it's tempting: it's halfway between the two averages.
- Correct: use totals. (10 × 80 + 30 × 60) ÷ 40 = (800 + 1,800) ÷ 40 = 65.
- Check: Class B is three times as big, so the combined average must sit closer to 60.
8. How do "fraction of the remainder" problems trick you?
Sam spends 1/3 of his salary on rent and then 1/4 of what's left on food. What fraction of his salary remains?
- Tempting answer: 5/12, from 1 − 1/3 − 1/4.
- Why it's tempting: it treats both fractions as fractions of the whole salary.
- Correct: after rent, 2/3 remains. Food takes 1/4 of that, so 3/4 of the 2/3 is left: 2/3 × 3/4 = 1/2.
- Check: with a $1,200 salary, rent is $400, leaving $800. Food is $200, leaving $600, which is half.
9. Why do you need to reduce remainders?
When n is divided by 6, the remainder is 4. What is the remainder when 2n is divided by 6?
- Tempting answer: 8.
- Why it's tempting: doubling the remainder feels like it should work.
- Correct: a remainder must be less than the divisor. 8 leaves a remainder of 2 when divided by 6, so the answer is 2.
- Check: try n = 4. Then 2n = 8, and 8 = 6 + 2. Try n = 10. Then 2n = 20, and 20 = 18 + 2.
10. How do you maximize x − y when x and y have ranges?
If 2 ≤ x ≤ 7 and −3 ≤ y ≤ 4, what is the greatest possible value of x − y?
- Tempting answer: 3, from 7 − 4.
- Why it's tempting: "maximize" makes you reach for the largest value of each variable.
- Correct: to make a difference big, make the first number as large as possible and the second as small as possible: 7 − (−3) = 10.
- Check: the smallest possible value of x − y is 2 − 4 = −2. So x − y ranges from −2 to 10.
What do these traps have in common?
Look back and most fall into three groups:
| Pattern | Traps | The fix |
|---|---|---|
| Wrong base | Reverse percent, +20%/−20%, fraction of the remainder | Ask "a percent or fraction of what?" |
| Wrong kind of average or combination | Averaging speeds, adding times, averaging averages | Go back to totals: total distance, total work, total sum |
| Wrong operation or rule | Add vs multiply in counting, "at least one," reducing remainders, ranges | Check against a quick sanity test or a small number |
The sanity checks matter as much as the methods. Each one takes a few seconds and catches the trap even when you didn't see it coming: "together must be faster than either alone," "the average sits closer to the bigger group," "a remainder is less than the divisor."
How do you train yourself to avoid these traps?
- Log the "why," not just the miss. "Averaged speeds because it looked symmetric" is useful. "Got it wrong" isn't.
- Practice traps mixed with other problems. Traps are easy to spot in a set labeled "percent traps." They're hard to spot mixed in with everything else, which is how the exam presents them. See interleaved practice for math.
- Recheck missed traps after a few days. If you can avoid one cold, two days later, the fix has stuck.
Relvora Prep is built around these mistakes. Most of its wrong answer choices are built from a specific mistake, like the ones above, and each explanation includes "why it's tempting," so you see the faulty method as well as the right one. Its no-pen mode turns questions into 20-second speed cards where you pick the fastest first move, which is a quick way to drill trap recognition on a phone.
Relvora covers GMAT Quant, GMAT Data Insights, GRE Quant and SAT Math, and has a free plan. Try your free 3-minute set with a free account to see how many traps you catch, or take the free diagnostic to find the ones that cost you the most points.
GMAT™ is a trademark of GMAC. GRE® is a registered trademark of ETS. Relvora is not affiliated with or endorsed by either.
Sources
Frequently asked questions
What is a trap answer on the GMAT?
A trap answer is a wrong choice that you'd get by making a specific, common mistake, such as adding two percent changes or averaging two speeds. It's tempting because it comes from a method that feels right.
Why does a 20% increase followed by a 20% decrease not cancel out?
The decrease applies to a bigger base. Multiplying by 1.20 and then by 0.80 gives 0.96, a net 4% decrease.
How do you find average speed for a round trip?
Divide total distance by total time. Don't average the two speeds, because you spend more time at the slower speed.
How do you calculate the probability of at least one success?
Subtract the probability of no successes from 1. For two independent tries with a 10% chance each, that's 1 − 0.9² = 0.19, not 0.20.